Performance, G-forces, adrenaline rushes. These are our traditional values. But what do we at
With its 800-volt architecture, the
Chargefox stations can be found across Australia, and their network span facilitates long distance travel across Adelaide, Melbourne, Sydney, Brisbane and Tasmania, with additional sites in Western Australia coming soon.
Access to complimentary Chargefox charging services is subject to customers downloading the Chargefox app and accepting Chargefox’s terms and conditions.
A new mobility concept is only innovative if it extends beyond the vehicle.
Our plug-in hybrid models combine two drivetrains that ideally complement each other. The internal combustion engine builds up power and torque with increasing speed. The maximum torque of the electric motor is immediately available. For you, this means: optimum performance. At the push of a button.
Discover more about
* The published consumption (l/100km and Wh/km), emissions (g/km) and kilometre (km) range figures (excluding any
The specified charging outputs and times (hour/minutes) are dependent on various factors: in general, the charging output and time can vary due to physical and chemical limits, depending on factors such as the available output of the country-specific energy infrastructure, the customer's own domestic installation, the temperature, interior pre-conditioning and charging status, as well as the age of the battery. Charging times may therefore be significantly higher than those specified. To achieve the optimum value of the specified DC charging time (DC = direct current) for a charge status increase from 5 to 80%, a CCS (combined charging system) fast-charging pedestal with > 270kW and > 850V is required, as well as a battery temperature of 30°–35°C. The charging status when commencing charging must not exceed 5%. For physical and chemical reasons, the charging speed decreases as the battery approaches its full capacity. Therefore, it usually makes sense to use fast DC charging to charge the battery up to 80% or up to the required range. The predominant use of CCS fast charging pedestals leads to a long-term increase in charging times. For regular fast DC charging, we recommend a maximum charging output of 50kW. When charging in a domestic environment, AC charging (AC = alternating current) is recommended. Using an (AC) industrial electrical outlet will result in improved efficiency and a much shorter charging time compared to using a household socket.
Published figures should only be used for the purpose of comparison between vehicles. Please contact an Official